Basketball Goal Frequently Asked Questions
Q. Once I order, how do I find out when it will be delivered/installed?
Once an order is placed, you will receive a phone call from our scheduling department within 5 business days to
work out a schedule day and time.
Q. How does installation work?
First, we contact Miss Utility to mark the area for
underground wires. Please note that they will not mark invisible fences or
underground sprinkler or lighting systems.
Please make our installers aware of items like that upon installation.
Play N’ Learn is not responsible for damage to any items not marked by Miss
Once Miss Utility has marked the area, we will come and
install your anchor system. We do not remove the spoilage (dirt removed for
anchor system) but we can place it neatly around a tree-line in your yard. If
you have no good place for it, you can leave the installers with lawn and
garden bags. They can use those, for a nice, neat, hassle free job. Once the
anchor system has had 3-5 days to properly set, we will come back and assemble
your goal and attach it to the anchor system. The whole installation process
usually takes about 2.5 weeks from order date depending on the time of year. If
ordering online, Installation options will be offered on the checkout page if you live within Maryland, Virginia or Washington DC. Choose Regular Install if we are installing the unit in the grass behind the driveway. Choose Custom Install if you need us to dig through the playing surface.
Q. Can you install through concrete, asphalt, etc?
Yes. The standard installation cost of $375 is based on installation behind the driveway, through Earth, grass, etc.
Installation through concrete/asphalt is available for an additional $200 - select custom install instead of standard install on the checkout page.
Q. Is it best to place the pole so the backboard is flush with the driveway?
No. A lot of the action happens when you are fighting for
that rebound under the rim. The best placement for the pole is as close to the
driveway/playing area as possible. This way, can utilize as much of the
overhang (distance from pole to backboard) as you can. NCAA uses a 4' extension
from the backboard to the end of the court as shown below. The image above of
"standard install" shows where we usually install the goals in
relation to the grass.
Q. What size is regulation?
A regulation backboard is 72”W x 42”H. The regulation height is 10' which all of our goals will go up to.
Q. What are the differences between all of the Goalrillas?
is constructed with a one piece solid steel pole. All Goalrillas
are easily adjustable from 7.5' to 10'. Additionally, they have flex rims,
glass backboards and a limited lifetime warranty. But, Goalrilla makes four
different series of goals:
Hands Down, the nicest full series is the CV series. The
CV54, CV60 and CV72. They are the newest style design where the backboard arms
go out to the edges of the board, providing a clean appearance. There isn’t any
metal touching the glass, so the rebound of the ball is consistent wherever it
hits. Every CV series hoop utilizes a thick 3.175mm 11 gauge steel. Remember,
the lower the gauge, the thicker the steel. The overhang on even the smallest
CV (the cv54) is three feet ensuring there is plenty of room to fight for a
rebound under the rim. Also, this makes it so the ball rolls to the grass
behind the playing surface less. Since the CV series uses the thickest steel of
the Goalrilla basketball hoop line-up, they are heavier and by far the
sturdiest goals (with the exception of the E1) offered with the least amount of
shake when the ball hits the glass. Currently a free pole pad and an edge pad
are included with every CV goal.
The GS (high number or GS "C") series is a
smaller take on the above CV series. This series includes the GS54c, the GS60c
and the GS72c. In a picture, they will all appear almost identical to the
corresponding CV series goal. These hoops also share the Clearview design,
where the extension arms attach to the edges of the backboard. In an effort to
get the cost down, while still providing Goalrilla playability and quality, the
steel used is thinner than that of it's CV counterpart. The GS54C uses
14 Gauge (1.984 MM) steel compared to the
CV54 which uses 3.175mm thick 11 gauge steel. The GS60C and GC72C uses 13 Gauge
(2.381MM) compared to the 3.175mm 11 gauge steel of the CV60 and CV72.
of the backboards in this series have the same width as the corresponding CV
goals, but the height of the board is lessened. Also, the extension arms are
shorter compared to that of the CV series. All in all, these are still
excellent goals that tower over all other brands; they are just not as thick or
as heavy duty as the CV series. Currently, the CV series above has free pole
and edge pads, so only buy a GS54C, GS60C or GS72C right now if you will not be
adding the pads. Otherwise it would make more sense price-wise to get the CV
series for around the same price.
DC72E1. This one goal is in a category of its own. This is the goal to buy if you are looking for the best residential goal ever made. 72" regulation backboard with 1/2" thick glass. A 6" x 8" 7 Gauge (4.554MM) steel pole. It's just a beast and can be seen here.
Q. Why do the Goalrilla goals stop lowering at 7.5’?
To be in compliance with ASTM safety standards Goalrilla Goals do not adjust lower than 7.5’.
Q. Can my goal move if I move?
Yes. The only thing permanent about our goals is the anchor system. Should you move, you are able to take your goal
and buy a new anchor system for your new house.
Q. Do you install basketball goals year round?
Yes, we install them year round.
Q. I think I am outside of your local delivery area, will you still deliver to me?
As long as you are in Maryland, Virginia or Washington DC we will deliver/install for you with the exception of Roanoke, Virginia. There may be very slight extra mileage charges depending on your county. You can view our mileage charge chart here:
View mileage charge chart